Table of Contents
Advertisement
4.2 Chipping:
Always wear gloves and safety goggles when using the shredder.
Make sure use highest speed while chipping, when chipping branches with a big
diameter, always feed the bigger ends into the chute first.
Advice: The hardness of the wood depends on the wood type, the time between
pruning and chipping and how dry the branches are. The machine performs best if the
branches are chipped right after pruning.
If the engine is slowing down while chipping, reduce the feeding rate of the branches.
Blunt blades may also be the problem. (see chapter 5.3 on how to change the blades)
If the machine becomes jammed, stop the engine immediately. Remove the blocked
materials and restart the engine. (see chapter 4.4)
4.3 Emergency Button:
The emergency stop button is located on the top of the feeding chute (see Fig.14) .
Push the emergency stop button by pressing the button and the engine will stop
immediately. To release the emergency stop button, turn the red button. Within half a
GBK130 Series Manual Book V1.01
6
B.W. Machinery
Advertisement
Table of Contents
