Polaris Timbersled ST 120 RAW 2019 Owner's Manual page 34

PRE-RIDE INSPECTION
PRE-RIDE SUSPENSION INSPECTION
Loose nuts and bolts can reduce your snow bike's reliability and cause needless
repairs and down time. Before beginning any ride, a visual inspection will
uncover potential problems. Check the following items on a weekly basis or
before any long trip.
Check suspension mounting bolts for
tightness.
Check rear idler wheel bolt for
tightness.
Check rear idler adjusting bolt
locknuts for tightness.
Check rail slide condition.
Check track tension.
Check ski runner/skag condition.
Check ski spindle bolts for tightness.
Check tie rod end nuts for tightness.
Swing Arm Pivot Bolt
BEFORE STARTING THE ENGINE
Before starting the engine, reference your host bike's owner's manual for engine
starting process and safety warnings.
Operating the vehicle with worn, damaged, or malfunctioning components
could result in serious injury or death. Never start the engine without checking
all vehicle components to be sure of proper operation.
32
ITEM
WARNING
SEE SECTION
-
page 34
-
page 49
page 34
page 49
-
-
-