Install The Faucet - Kohler K-12177 Installation Manual

Sink
Ring
Screw

2. Install the Faucet

Fit the faucet through the sink hole.
Position the faucet so the handle faces toward the user.
Partially thread two screws into the threaded ring until they
barely protrude from the backside of the threaded ring.
Slide the fiber washer, metal washer, and ring to the threaded
shank until it is about 1/4" (6 mm) from touching the sink
bottom.
Turn the ring so the screws are to the front and back of the
faucet.
Tighten the screws securely and evenly using a Phillips
screwdriver.
Kohler Co.
Threaded Shank
Fiber Washer
Metal Washer
5 1004614-2-E