Download Print this page

Cobalt Digital Inc 6590 Owner's Manual

Analog composite with 4-line adaptive comb filter, y/c or component ypbpr 10-bit a/d to 270mb 4:2:2 sdi decoder with edh

Advertisement

Quick Links

Specifications
Analog Inputs:
Differential Input
Input Return Loss
Input A to D Quantization
A/D sampling rate
Frequency Response
K-Factor
SCH Phase
Differential Gain
Differential Phase
S/N
Chroma Luma Delay
Y/C Separation
Conversion Time
Digital Outputs:
Output Quantization
Output Return loss
Output Error Coding
Jitter Filter LBW
Operating Temperature Range
Humidity
Power Input
Size
This product is not authorized for use in life support systems. Product
liability limited only to the replacement of this unit. Cobalt Digital Inc. does
not assume any liability for loss of use due to failure of this component.
Specifications subject to change without notice.
Cobalt Digital Inc.
2406 E. University Ave.
www.cobaltdigital.com
Office: 217-344-1243
Rev. 2.2 tjh
Copyright 2005
NTSC, PAL or SECAM Analog
Composite, Y/C or Component YPbPr
Common Mode rejection >3.5V
> 35 dB at 5 MHz
10-bit
8:4:4 (2x)
Y 0-5.0 MHz +/- 0.25 dB
< 1%
< 1 degrees
< 1.8%
< 0.8%
> 50 dB
< 2 ns
4-line adaptive, 4-line non-adaptive, 3-
line adaptive and notch filter
1.25H
4 with EDH
10-bit
>17 dB @ 270Mbit
SMPTE EDH
2Hz
40-100 degrees F.
40-120F Optional Heat Sink
(non-condensing)
+5V @ 0.6 amps
Optional 7-28 VDC 4 W
BNC-BNC 6"x3"x1" (153x76x25mm)
Urbana, IL 61802 USA
Fax: 217-344-1245
Cobalt Digital Inc.
Model 6590
Analog Composite with 4-line Adaptive Comb
Filter, Y/C or Component YPbPr
10-bit A/D to
270Mb 4:2:2 SDI Decoder with EDH
Composite
Model 6590
Y
Analog Composite, Y/C and
Component YPpPr
C
to 10 bit SDI 4:2:2 SMPTE
Pr
259M with EDH Converter
Four line Adaptive Comb Filter
10 bit A to D
Pb
Cobalt Digital Inc.
Dual Input
217.344.1243 Voice
G
5
5VDC 0.6A
217.344.1245 Fax
7-20VDC 4W
7-20
www.cobaltdigital.com
Owner's Manual
SDI
Output
SDI
Output
SDI
Output
SDI
Output
Cobalt Digital Inc. 2005

Advertisement

loading

Summary of Contents for Cobalt Digital Inc 6590

  • Page 1 BNC-BNC 6”x3”x1” (153x76x25mm) This product is not authorized for use in life support systems. Product liability limited only to the replacement of this unit. Cobalt Digital Inc. does not assume any liability for loss of use due to failure of this component.
  • Page 2 The COBALT 6590 is a high-quality 10-bit analog to digital decoder for converting SWITCH SW1 SETTINGS 525 and 625 line, analog composite, Y/C and component signals (YPbPr) to 270 Mb SW1-1 thru SW1-4 4:2:2 SDI (SMPTE 259M-C) output with SMPTE EDH. The user can select four...