Assembly - Bissell POWERFORCE 1700 SERIES User Manual

Assembly

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
1
First, place the
upper handle onto
the base and push it
down. Then attach
the handle with the
2 screws that are
taped to the handle
in a plastic bag.
3
Then wrap the
power cord around
the cord release
clips and clip the
end of the plug to
the power cord.
5
Now wrap
the hose
through the
hose clip
and connect
the hose
wand to the
foot hose
down at the
bottom of
the vacuum.
Extension Wand
NOTE: The crevice tool can be found inside the extension wand. You can remove
it to use it and put it back to store it neatly out of your way when you're fi nished.
2
Next, insert the
lower cord wrap
and turn it to
the left to lock
it into place.
4
Next, insert the end of
the hose into the back of
the vacuum and twist to
lock it into place.
Put your accessory tools on the
vacuum and you're ready to go!
Dusting Brush TurboBrush
www.BISSELL.ca
TM Tool
5