Vax PowerWash P86-P4-T Get Started Manual page 13

IMPORTANT: When using solution make sure you follow the dilution instructions and use Vax solution only.
Solution can only be used with the trigger handle, lance and solution nozzle, or car/outdoor/rotary brush
if supplied. Solution CANNOT be used with the jet and turbo nozzles.
Using solution with your pressure washer
Unhook the solution tube and
insert into the solution bag.
Solution only dispensed with
the trigger handle, lance and
solution nozzle, or car/outdoor/
rotary brush if supplied.
Switch the pressure washer on
and squeeze trigger to dispense
the water and solution mix.
Using your machine
After use rinse the pressure washer
to prevent blockages. Inset the
solution tube into a bucket of fresh
water (Max 40 � C), turn the
machine on and squeeze
the trigger for 1 minute.
Always make sure the
pressure washer is
switched OFF before
connecting/disconnecting
the pressure hose,
lance, accessories or
detergent bag.