Gas Safety Valve; Refrigerator - Norcold N300 Service Manual

Safety valve
1. Close the valve at the main propane gas tank(s).
2. Remove the thermocouple from the thermocouple inter-
rupter.
3. Remove the wires from the thermocouple interrupter.
4. Using two wrenches, remove the thermocouple interrupter
from the safety valve.
5. Remove the gas outlet fi tting from the safety valve.
6. Remove the safety valve from the thermostat.
7. Assemble the replacement safety valve to the thermostat.
NOTE: Put "Loctite" or similar product on the threads of the
gas outlet fi tting to make sure the connection does not
leak.
8. Assemble the replacement safety valve to the gas outlet
fi tting.
9. Turn the thermocouple interrupter only about half way into
the replacement safety valve.
10. Turn the thermocouple only about half way into the ther-
mocouple interrupter.
11. Using two wrenches, fully tighten the thermocouple inter-
rupter onto the safety valve.
12. Fully tighten the thermocouple onto the thermocouple
interrupter.
13. Attach the wires to the thermocouple interrupter.
14. Examine all the gas connections for leaks.

Refrigerator

1. Close the valve at the main propane gas tank(s).
2. Remove the gas supply line from the bulkhead fi tting of the
refrigerator.
3. Remove the AC power cord from the receptacle.
4. Remove the DC input leads from the refrigerator.
- Put tape on the positive lead to prevent an accidental elec-
trical short and a blown fuse.
5. Remove the screws that attach the refrigerator to the fl oor.
6. Remove the screws that attach the refrigerator to the wall.
7. Remove the refrigerator from the opening.
8. To install the refrigerator, do steps 1-7 in reverse.
9. Examine all the gas connections for leaks.
Service Manual N300 Models - 13