Advertisement
21. Replace the brackets (A-C) and secure them with the screws
removed earlier.
To replace the brackets:
A. Insert the bracket in the direction towards the front panel,
then push the end towards the rear panel down.
NOTE: Ensure the cables are collected and seated into the space and
the gap at the bottom of the bracket.
B. Tilt the bracket so that the top of the bracket is inserted first
into the chassis, then push the bottom of the bracket so
that the bracket is seated firmly within the chassis.
C. Align the bracket's screw holes with the screw holes on the
chassis and replace the bracket.
16
Advertisement
