Table of Contents
Advertisement
• Screen locking sounds
• Touch sounds
• Vibrate on tap
15
Cast: You can cast your screen from your device. Connect your device to the
same Wi-Fi network as your Miracast™ or TV. Tap on Options (
box next to Enable wireless display.
APPS
1
From Home screen or App screen, tap on Settings (
2
Select All apps drop-down list. You can select any of the following options:
• All apps
• Enabled
• Disabled
3
Select the required app from the list. You can open the app and select FORCE
STOP.
4
On the Apps screen, tap on Options (
• Show system
• Reset app preferences
5
Tap the icon (
following options are displayed:
• App permissions: The list of apps with the permissions are displayed.
• Default: The assigned default apps are displayed.
• Advanced: Displays the list of Special access.
USB POWER SAVING
1
From Home screen or App screen, tap on Settings (
Power Saving (
2
Automatic Power ON: If enabled, the device gets automatically power ON
when the USB is connected.
3
Automatic Power OFF:
• Automatic Power OFF: If enabled, the device gets automatically power OFF
at the set time.
• Power off device at: If you enable Automatic power off, this option will be
active. You can set the time for the device to be power off.
• Automatic power OFF: If this is enabled, upon USB disconnection, the
device is power off after the set hours.
• On USB disconnect, power off: You can set the hours for the device to be
powered off once the USB is disconnected.
) on Apps screen. Configure apps window is displayed. The
).
). The following options are displayed:
38
) > check the
) > Device > Apps (
) > Device > USB
).
Advertisement
Table of Contents
