Table of Contents

Advertisement

FM RADIO

You can listen to the radio through FM radio. A wired headset should be connected
to enable FM radio.
1
From App screen, tap on FM Radio (
2
A message Please plug in a Headset to use FM Radio is displayed. Connect a
wired Headset with the side connector to enable FM Radio. FM radio icon (
and headset icon (
• Side Connector: As KWSA80K device does not support the jack, side
connector is used to plug-in the jack and listen to FM radio over the headset.
3
Tap on Options (
displayed.
4
Tap on Start Recording to record the audio which is broadcasted on the radio to
listen to the same later.
5
Tap on Stop Recording to stop the audio recording.
6
Tap on Options (
• Regional Band: The regional band with frequency range is displayed.
• Channel Spacing:
• Lower Freq Limit (in Mhz)
• Higher Freq Limit (in Mhz)
• Audio Output Mode: Select any of the following options as a output mode:
Stereo or Mono
• Alternate Frequency: Check this option to enable/disable the auto selection
of alternate frequency.
• Record Duration: You can set the time duration for recording in the following
time frame:
• 5 minutes
• 15 minutes
• 30 minutes
• Until stopped
• Revert to Factory Defaults: This option deletes all the settings including
Presets. Select OK to confirm.
7
Tap on Sleep. You can turn off the radio after a selected time frame:
• 15 minutes
• 30 minutes
• 45 minutes
• 1 Hour
8
Tap on All Channels. The available channels/stations are displayed with
the station serial number. For example, first station in the list is displayed as
Station:1.
• Long tap on the required station/channel and the following options are
displayed:
) are displayed on the Status bar.
) > Scan to scan all the stations. Available channels are
) > Setting and the following options are displayed:
).
76
)

Advertisement

Table of Contents
loading

Table of Contents