Kenwood KWSA80K User Manual page 15

3 INSERT BATTERY
Insert the battery and flush into the
battery slot such that the three metallic
contacts at the top of the battery are
aligned with the metallic contacts within
the battery compartment.
4 CLOSE COVER
Close the battery cover. Rotate the
battery cover screws in clockwise
direction. You can use the supplied
screwdriver to tighten the screws. Ensure
not to over-tighten the screws.
• Make sure there is no gap between
the battery cover and the body.
WARNING
BATTERY CANNOT BE CHANGED IN HAZARDOUS LOCATIONS.
15