Charging The Battery - Kenwood KWSA80K User Manual

CHARGING THE BATTERY

The battery delivered with KWSA80K is not fully charged. We recommend that
you charge KWSA80K for 2.5 hours before you use KWSA80K for the first time.
Only the power supplies with outputs meet the SELV requirements
can be used for charging. The maximum allowable input voltage for
KWSA80K is 9V.
There is a risk of explosion while charging if the battery has been
replaced by an incorrect type.
If the battery is completely out of charge, it can take several minutes
for the charging icon to appear when the charger is connected.
WARNING
ONLY THE BATTERY CAN BE REPLACED IN NON-HAZARDOUS
LOCATION.
1 INSERT CHARGER
Insert the charger plug into a power outlet.
2 CONNECT TO KWSA80K
Insert the charger connector to the charging port.
3 CHARGING ANIMATION/ICON
• If the battery is being charged when KWSA80K is switched off, a
battery charging animation with current battery level is displayed.
• If the battery is being charged while KWSA80K is switched on, the
battery icon on the status bar shows the animation indicating that
the battery is being charged.
• After the battery is fully charged the charging animation stops and
you can disconnect the charger from KWSA80K.
17