Sony NSR-500 Installation Manual page 4

Hide thumbs Also See for NSR-500:

NSR Software Clean Installation Procedures

All data which are recorded in NSR-500 will be deleted after clean

installation. Before clean installation you should confirm whether all

data allows to be deleted.

Procedures

1. Connect Install-USB-Device or DVD Drive into which Install-DVD is inserted. Then

push power button to start up.

2. Press "c" key. Then a message for notification that all of data in H.D will be replaced

is displayed . Press "y" key to continue installation procedures.

Note.

If you can not see the above message, there may be problem in your installation

device. In the case of Install-USB-Device, if you change USB memory to other one,

you may be able to see the above. In the case of Install-DVD, if you change DVD drive

or install-DVD to others, you may be able to do it.

Issued: April 28, 2011

Issue: Jan/26/2009

NSR-1000 series

NSR-500