TechPure TT-UV24-15 Installation & Operation Manual page 8

TECHPURE 24V GERMICIDAL UV SYSTEM INSTALLATION & OPERATION MANUAL
INSTALL UV SAFETY VIEWPORT
• Adhere the provided UV safety label
to the outside of the duct near the
installation location and drill a 5/8" hole
as indicated on the label. Press the UV
safety viewport into hole.
• Close all access panels and reconnect
power to the air handler.
• Verify that a blue glow can be seen
through the UV safety viewport.
NOTICE
Replace Lamp Per Recommended Maintenace Schedule.
UV-C lamps expend their germicidal effectiveness over time. Replace the lamp even
if the lamp appears to be operating normally.