Table of Contents
Advertisement
Chapter 7 | Specifications
Detector
Dimensions
Ingress protection
Enclosure
Inlet and outlet cable
Type of cable
Power supply
Consumption
Status indication during
calibration
Calibration
Sensor replacement
Humidity
Storage conditions
Certification
118*110*60 mm
IP65
ABS
2 cable gland M16, diameter 4 to 8 mm
Type MPI-22A
12-30V
Electrochemical sensor : 2.5mA in normal
operating @ 24V
Catalytic sensor : 50 mA in normal operating@ 24V
LED red/green
Automatic, no need to open the sensor due to a
gas introduction device equipped with a magnetic
switch, or with a potentiometer inside of the case.
Calibration gas is set in the detector
Sensor replacement switch on the interior of the
CPS 10 case.
Detection of sensor
15-90% RH
4 – 20 °C
20 – 60 % RH
1 bar ± 10 %
6 months maximum
CEM EN 50270 (type 1)
25
Advertisement
Table of Contents
