Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for swepac F 50B
Summary of Contents for swepac F 50B
- Page 1 F 50B USER MANUAL IN ORIGINAL Dok: 101518-GB 1838...
- Page 2 F 50B...
-
Page 3: Table Of Contents
F 50B SWEPAC F 50B used for gravel and sand packing in small-scale construction work such as, for example, concrete blocks or paving for garden installations. With the vulkollan plate (accessory) mounted under the bottom plate, stone coatings are effectively levelled off. -
Page 4: Safety Instructions
F 50B SAFETY INSTRUCTIONS STANDARDS Noise • The operator must be informed of the manufacturer's Measurement according to the standard EN 500-4 Rev.1: safety and operating instructions before using the machine. 1998, Annex C: Measuring accuracy ± 0.5dB (A) in 95% of measurements. -
Page 5: Signs
F 50B SIGNS Warning signs Machine Signs MACHINERY Before use, carefully read the manual and its safety instruc- tions so that you can handle the machine safely. Ensure that the manual is always accessible. 1. Manufacturer 2. Place, country of manufacture. -
Page 6: Technical Data
F 50B TECHNICAL DATA FUNCTION The machine consists of a bottom plate with vibrating elements F 50B and a top-mounted suspended plate. The power transmission between the electric motor and the Weight, net ............52kg vibration element is enabled by means of a V-belt. Due to the Bottom plate bxl .........300 x 500mm... -
Page 7: Technical Description
F 50B TECHNICAL DESCRIPTION 1. Operating handle 2. Protective cover 3. Electric engine 4. Rubber dampers 5. Vibrating element 6. Bottom plate 7. Motor plate 8. V-Belt 9. Pulley 10. Battery 11. Yoke 12. Charging socket 13. Start/Stop button 14. Indicator light for error codes... -
Page 8: Daily Checks
F 50B DAILY SUPERVISION Precautions, Chargers The sparking phenomenon is normal when connected to the battery due to high current. Charging 1. Check if your local area network is consistent with the The charger is designed to charge only LITHIUM batteries. -
Page 9: V-Belt Drive
F 50B V-belt drive START Check the tension and condition of the tyre regularly. Start the machine by pressing the start button in position 1. Replace damaged V-belt for new type XPZ662 for F 50. NOTE: When replacing a V-belt, remove the protective cover. -
Page 10: Cleaning, Storage And Recycling
F 50B CLEANING When cleaning the entire machine, do not wash directly with the high pressure jet on the connection components. STORAGE The machine should be stored in a well-ventilated and dry environment. When charging indoors, always observe the regulations that apply to battery charging at the workplace. -
Page 11: Transportations
F 50B TRANSPORT Lift with crane Attach a sling to the machine's lifting eye. Disassembly of handle It is easy to remove the handle without tools, and the luggage compartment of a regular passenger car is sufficient for transport. Remove the handle by tipping it forward and pulling apart the booms so that the fasteners release. -
Page 12: Battery
F 50B BATTERY Is certified according to: UN 38.3 Rev. 6 IEC 62619 NOTES... - Page 13 F 50B NOTES...
- Page 14 F 50B NOTES...
-
Page 15: Ec-Declaration Of Conformity
EC Declaration of Conformity Manufacturer Swepac AB Blockvägen 3 34132 Ljungby 1. Category: Plate compactor 2. Type: F 50B 3. Motor efficiency: F 50B 1.7kW The product complies with the following directives: 2006/42/EC 2000/14 /EC 2004/108/EC EN 500-1 EN 500-4 Technical documentation available from: Swepac AB, Blockvägen 3 34132 Ljungby SE... - Page 16 SWEPAC AB Address Blockvägen 3, 341 32 Ljungby, tel 0372-156 00, fax 0372-837 41, Email mail@swepac.se, Website www.swepac.se...
Need help?
Do you have a question about the F 50B and is the answer not in the manual?
Questions and answers