Belkin F5D8233EA4 User Manual page 45

Using the Web-Based Advanced User Interface
Using the Bandwidth Switch
This switch allows you to set the Router's wireless bandwidth modes.
There are several modes available:
1)
20MHz only
Setting the Router to this mode allows only 20MHz operation. This
mode is compatible with N, draft 802.11n-, 802.11g-, and
802.11b-compliant devices, but will limit N, draft 802.11n-compliant
devices' bandwidth by half. Reducing bandwidth to 20MHz-only
operation might solve some wireless problems.
2)
20MHz/40MHz Auto
Setting the Router to this mode allows it to switch automatically
between 20MHz and 40MHz operation. This mode enables 40MHz
operation, to maximize speed for N, draft 802.11n-compliant
devices when conditions permit. When a legacy 802.11g access
point is presented and occupies an adjacent secondary channel,
the Router automatically reverts to 20MHz operation to maximize
compatibility. We recommend using this as the default mode.
43 43
1
2
3
4
5
6
7
8
9
10