Belkin F5D8233EA4 User Manual page 31

Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to Static IP
A static IP address connection type is less common than other
connection types. If your ISP uses static IP addressing, you will
need your IP address, subnet mask, and ISP gateway address. This
information is available from your ISP or on the paperwork that
your ISP left with you. Type in your information, then click "Apply
(4)
Changes" . After you apply the changes, the Internet Status
indicator will read "connection OK" if your Router is set up properly.
1. IP Address (1)
Provided by your ISP. Enter your IP address here.
2. Subnet Mask (2)
Provided by your ISP. Enter your subnet mask here.
3. ISP Gateway Address (3)
Provided by your ISP. Enter the ISP gateway address here.
29 29
(1)
(2)
(3)
(4)
1
2
3
4
5
6
7
8
9
10