Sony RM-785 Service Manual page 19

3
Adjust the picture and the sound levels.
The following are the items which can be stored
in a program .
PICTURE SYNC
HUE
VNR
COLOR NOTCH
BRIGHT D.COL
SHARP
TREBLE
BASS
BALANCE
To check the current level of each control , press
OISPLA Y key/button.
4
Press the MEMORY key/button .
PROGRAM indication turns red. After a few
seconds. the indication will turn back to white,
which confirms that storing was successfully
completed.
5
Press the CONTROL key.
To change the programmed adjustment levels
Press the PROGRAM key/button to choose the program
number to be changed. Readjust the picture and sound
levels . Be sure to press MEMORY after the adjustment is
done.
To restore the original picture and sound levels
Press the selected input select key/button again.
The levels are also restored when the power is turned off
completely and then on with the POWER switch on the unit.
To check the programmed adjustment levels
Press the PROGRAM key/button to select the desired
program number. then press the DISPLAY key/button.
PVM-3230
RM-785
Using the stored program
1
Display the desired input source by pressing
one of the input select keys /buttons.
LINE
A
2
Select the desired program number by
pressing the PROGRAM key /button.
PROGRAM
1
The programmed adJustment is done.
-- 19 -