Page 1
Filling the sampler is simple and provides a wide variety of sorbent options and a longer shelf-life. * U.S. Patent No. 6,607,581 Performance Profi le Sampling Rates: Go to the SKC Passive Sampling Guide at www.skcinc.com/catalog/passive-guide.php. Analysis: Thermal desorption; gas chromatography See Analysis Instructions at www.skcinc.com/instructions/40125.pdf.
Page 2
Once all sorbent has been transferred from the vial, remove the funnel, and replace the plug on the compartment access port. If a blank/correction is required, remove the plug Plug from the blank/correction compartment (on right Clip side, immediately above SKC cover). Blank/ Repeat Step 3. correction compartment Sliding cover Open second vial and repeat Steps 4a.
Page 3
Sliding cover Stop sampling: Slide sampler cover to closed position (arrow and SKC visible). Write sample Sample compartment stop time on pouch label. Important: Measure and record ambient temperature Clip and atmospheric pressure. Include in information sent Blank/ to the laboratory.
Page 4
Ω Can be stored for up to one year at ≤ 39.2 F (4 C) SKC Limited Warranty and Return Policy SKC products are subject to the SKC Limited Warranty and Return Policy, which provides SKC’s sole liability and the buyer’s exclusive remedy. To view the complete SKC Limited Warranty and Return Policy, go to htt p://www.skcinc.com/warranty.
Need help?
Do you have a question about the ULTRA 690-200 and is the answer not in the manual?
Questions and answers