Ordering Information - SKC Reusable Parallel Particle Impactor Operating Instructions Manual

Ordering Information

PPI Samplers, require fi lter, substrates, and support
Respirable PPI (gold), 2 L/min, aluminum
Thoracic PPI (blue), 2 L/min, aluminum
Respirable PPI (orange), 4 L/min, aluminum
Respirable PPI (red), 8 L/min, aluminum
Recommended Collection Filters for PPI, required for sampling
Select a fi lter based on your application.
PVC Filters, 37 mm, 5.0-μm pore size, pk/100
PTFE Filters,* 37 mm, 2.0-μm pore size, with laminated PTFE support,
for metalworking fl uids (NIOSH 5524), pk/50
MCE Filters, 37 mm, 0.8-μm pore size, pk/100
Filter Supports, required for sampling. Select either cellulose or stainless steel.
Support Pads, cellulose, 37 mm, pk/100
Support Screen, stainless steel, 37 mm, wide mesh, ea
Impaction Substrates, four required for each sample
Porous Plastic Discs,
disposable, pk/200
Accessories
Multi-purpose Calibration Jar
Forceps, stainless steel, with non-serrated fl at tips
Filter-Keeper, for transporting and storing 37-mm fi lter samples, pk/10
* Back pressure on PTFE fi lters can vary within the same lot.
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy, which
provides SKC's sole liability and the buyer's exclusive remedy. To view the complete
SKC Limited Warranty and Return Policy, go to htt p://www.skcinc.com/warranty.
/ -inch diameter, pre-oiled, ready to use,
3
8
www.skcinc.com
8
Cat. No.
225-380
225-381
225-382
225-383
225-5-37
Contact SKC
225-5
225-27
225-26
225-388
225-111
225-8371
225-8303A
Form 38038 Rev 1901