SKC Reusable Parallel Particle Impactor Operating Instructions Manual page 6

Removing the Collection Filter and Impaction Substrates
1. Unscrew and remove the two screws that hold the
inlet plate to the base plate.
2. Lift off inlet plate to expose impaction plate.
3. Use a thin, fl at implement to remove impaction sub-
strates and discard them.
4. Lift off impaction plate to expose base plate.
5. Use forceps to remove collection fi lter and place in an
appropriate container for shipment to a laboratory.
Transporting Samples and Analysis
Package and transport samples and blanks in a manner that will prevent sample loss
and contamination and send to an accredited laboratory for gravimetric or chemical
analysis.
6