Basic Operations; Turning.power.on/Off; Turning.power.on; Power.down - Pioneer SGX-CA500 User Manual

Cyclocomputer
Hide thumbs Also See for SGX-CA500:
Table of Contents

Advertisement

Basic Operations

Turning Power On/Off
Turning Power On
1. Press the [START/STOP] button for more than
two seconds.
An.opening.message.will.appear.and.the.Cyclocomputer.
will.begin.start-up.
The.setup.screen.will.automatically.display.for.the.first-time.
power-up.
Power Down
1. Press the [START/STOP] button for more than
two seconds.
A.shut-down.message.will.appear.and.the.system.will.

power.down.

Initial Setup
When.you.turn.the.device.on.for.the.first.time,.the.InitialSetup.
screen.is.displayed.
You.can.also.later.change.the.settings.you.configure.on.the.
Initial.Setup.screen.using.the."System".item.of."Cyclocomputer.
Settings."
1. Tap [Language] and select a language.
Drag.the.screen.and.tap.the.language.that.you.want.to.
display.
2. Tap [Date & Time] and set the date and the time.
Time.Zone
Select.a.time.zone.
Date
Enter.the.date.
Time
Enter.the.time.If.the.[24-Hour.Format].check.
box.(below).is.cleared,.you.can.specify.[AM].
or.[PM].for.the.time.setting.
24-Hour.Format
Check. the. box. to. display. time. in. 24. hour.
format.
Date.Format
Select.the.date.format.
After.all.of.the.settings.are.the.way.you.want,.press.the.
[Back].button.to.return.to.the.Initial.Setup.screen.
For.information.about.touch.panel.operation.and.text.input.
methods,.refer.to."How.to.Operate.the.Touch.Panel."
3. Tap [Close].
The.Initial.Setup.is.finished.and.CycloMeter.starts.
Pairing Sensors
Pair.the.SGY-PM900.Pedaling.Monitor.Sensor.or.other.ANT+.
sensors.to.the.device.
Before.connecting.the.sensors:
•. Make.sure.that.the.sensors.that.you.want.to.pair.are.activated.
•. If.more.than.one.sensor.is.activated,.bring.the.device.close.to.
the.sensor.or.specify.the.device.number.to.pair.
•. If.you.use.the.speed.sensor.sold.separately.and.the.wheel.
circumference.is.different,.set.the.wheel.circumference..The.
wheel.circumference.is.set.to.2096.mm.by.default.
1. Mount the sensors on your bike.
For.details.about.how.to.mount.sensors,.refer.to.the.user’s.
manual.of.your.sensors.
2. On the home screen, tap the [Sensors] icon.
3. Tap [Connect New].
This.displays.the.sensor.settings.menu.
4. Tap [Device Type] and then select the type of
sensor(s) you wish to pair.
5. Tap [Search].
The.message.“Searching.Please.wait.”.appears..If.the.
sensors.are.paired,.the.information.from.the.sensors.is.
displayed.
6. Confir the information from the sensors.
Confirm.that.“OK”.is.displayed.in.the.[Error.Rate].area.
•. If.“NG”.is.displayed.in.the.[Error.Rate].area,.the.sensor.
information.is.not.received.properly.due.to.a.communication.
error..Make.sure.that.the.sensor.is.activated,.bring.the.device.
closer.to.the.sensor.and.try.pairing.again.
•. You.may.not.pair.with.the.sensor.due.to.the.influence.of.the.2.4.
GHz.frequency.band..If.“NG”.is.displayed.even.if.the.device.
is.moved.closer.to.the.sensor.and.paired.with.it,.try.again.
someplace.where.there.is.no.interference.from.microwaves,.
radio.waves,.or.wireless.equipment.
Specifying the device number
If.you.want.to.specify.the.sensor.device.number,.follow.the.
procedures.listed.below.before.pairing.the.sensor.
1. Check the [Specifie Search] check box in the
sensor connection menu.
[Device.Number].is.displayed.in.the.connection.menu.
•. Refer.to.the.user’s.manual.of.the.ANT+.sensor.for.information.
about.how.to.look.up.the.device.number.
2. Tap [Device Number].
3. Input the device number and tap [Done].
•. If.you.specify.the.device.number,.make.sure.that.the.specified.
number.is.displayed.in.[Device.Number].of.the.sensor.
information.confirmation.screen.
How to Operate the Touch
Panel
The.display.of.this.device.is.a.touch.panel.for.direct.operations.
„ Tap
Quickly.touch.an.item.on.the.screen.to.select.or.confirm.it
„ Swipe
Move.your.finger.in.a.vertical.or.horizontal.direction.on.the.
screen.
Do.this.to.switch.screens.or.scroll.
„ Long touch
Touch.and.hold.an.item.on.the.screen.
Do.this.to.open.the.pop-up.menus.
„ Drag
To.move.an.item.on.the.screen,.simply.touch.the.item.with.
your.finger.and.move.it.to.the.new.location
Precautions.when.using.the.touch.panel:
•. Do.not.use.a.hard.or.sharp.object.to.operate.the.touch.panel,.
doing.so.may.damage.it.
•. Do.not.use.commercially.available.protective.sheets.or.films.as.
they.may.interfere.with.normal.operation.They.may.cause.the.
device.to.not.operate.correctly.
•. You.can.operate.the.touch.panel.while.wearing.gloves..Apply.
slightly.more.pressure.than.with.common.touch.panels.
Page 6

Advertisement

Table of Contents
loading

Table of Contents