Table of Contents
Advertisement
Manually Configuring your Router
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
1. User Name -
Enter the user name. (Assigned by your ISP).
2. Password -
Enter your password. (Assigned by your ISP).
3. Retype Password -
4. IP Assigned by ISP -
your ISP. Select "No" only if your ISP assigns you a fixed IP address.
5. IP Address -
If you are using a fixed IP address, enter the fixed IP
address supplied by your ISP.
6. Subnet Mask -
If you are using a fixed IP address, enter the subnet
mask supplied by your ISP.
7. VPI/VCI -
Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here. (Assigned by your ISP).
8. Encapsulation -
Select your encapsulation type (supplied by your ISP)
to specify how to handle multiple protocols at the ATM transport layer.
VC-MUX: PPPoA Virtual Circuit Multiplexer (null encapsulation) allows
only one protocol running per virtual circuit with fewer overheads.
LLC: PPPoA Logical Link Control allows multiple protocols running over
one virtual circuit (more overhead).
9. Dial on Demand -
automatically connect to the Internet when a user opens up a web browser.
10. Idle Time (Minutes) -
connection. After this time has been exceeded, the connection will
be terminated.
Confirm the password. (Assigned by your ISP).
Select "Yes" for automatic IP assignment from
By selecting "Dial on Demand" your Router will
Enter the maximum idle time for the Internet
33
33
1
2
3
4
5
6
7
8
9
10
11
12
Advertisement
Table of Contents
