Table of Contents
Advertisement
Connecting your Router
Note: One RJ11 telephone cord is supplied. When inserting an
RJ11 plug, be sure the tab on the plug clicks into position to
ensure that it is properly seated.
3.
If your have a dedicated ADSL service telephone line with an
RJ11 wall jack, simply connect a telephone cord from the wall
jack to the gray RJ11 port labeled "DSL line" on the back of
your Router.
4.
If you have an RJ45 wall jack for your ADSL service, connect an
RJ45-to-RJ11 converter to the wall jack. Then connect one end of
a telephone cord to the converter and the other end to the gray
RJ11 port labeled "DSL line" on the back of your Router.
Note: ADSL microfilter may or may not be provided depending on
your country.
11
11
1
2
3
4
5
6
7
8
9
10
11
12
Advertisement
Table of Contents
