Advertisement
Zeno Mobile Quick Start Manual
Step
Description
7.
In the Zeno Mobile Notification Area you will get the confirmation that
the setup has been oriented successfully.
The symbol that indicates the gamtec setup in the Map View turns from red
to green
Now you can start taking offset measurements. Disto S910 measurements are
always triggered on the Disto S910 itself.
Step
Description
1.
Measure a point and tap the WLAN button
to Zeno Mobile.
The Meas App is started automatically on the Disto S910 as soon
as the connection between Disto S910 and Zeno Mobile is estab-
lished.
2.
To switch off the gamtec mode and return to measuring with GNSS only
tap the gamtec button
.
. It will turn white again.
to send the measurement
21
Advertisement
