Festool CLEANTEX CTM 26 E Original Operating Manual/Spare Parts List page 18

CTM
GB

Open the locking clips [2-2] and
remove the top section of the machine [2-1].

Turn the top section of the machine so that the
main filter is facing upwards (Fig.[9]).

Fold over the lever [9-3] and remove the retain-
er. [9-2]

Remove the used main filter and replace [9-1]
with a new one.

Dispose of the used filter in accordance with
statutory regulations.

Insert the retainer [9-2] and fold over the lever
[9-3] until it engages.

Replace the top section [2-1] and close the
locking clips [2-2].
9.2 Emptying the dust container
The dust container [2-3] can be emptied once the
top section has been removed.

After extracting fluids, clean the fill level sen-
sors [10-1] regularly with a soft cloth and in-
spect for damage.
10 Accessories
The order numbers for the accessories and filters
can be found in the Festool catalogue or on the In-
ternet at "www.festool.com".
10.1 Modules
The following modules for upgrading the mobile
dust extractor are available in the accessories pro-
gramme. Modules must be fitted to the module slot
[1-3] by an authorised service workshop:
– Compressed air module,
– Socket module with permanent power supply,
– Socket module with automatic switch-on unit
(not suitable for GB 110 V version),
– Energy box module (EAA) for using the automatic
switch-on unit on the EAA.
You can find more detailed information on the mod-
ules at "www.festool.com".
11 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble country-specific regulations.
EU only: European Directive 2002/96/
EC stipulates that used electric power tools must
be collected separately and disposed of at an envi-
ronmentally responsible recycling centre.
18
12 EU Declaration of Conformity
Mobile dust extractor
CTM 26 E
CTM 26 E AC
CTM 36 E
CTM 36 E AC, CTM 36 E
AC-LHS
CTM 36 E LE
CTM 36 E LE AC
CTM 48 E
CTM 48 E LE
CTM 48 E AC
CTM 48 E LE AC
Year of CE mark:
CTM 26 E, CTM 36 E,
CTM 36 E LE
CTM 26 E AC, CTM 36 E
AC, CTM 36 E LE AC,
CTM 36 E AC-LHS
CTM 48 E, CTM 48 E LE,
CTM 48 E AC, CTM 48 E
LE AC
We declare under sole responsibility that this prod-
uct complies with the following directives and stan-
dards:
2006/42/EG, 2004/108/EG,
01.01.2013), EN 60335-1, EN 60335-2-69, EN
55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
27.10.2010
Information on REACh: www.festool.com/reach
Serial no.
495865, 495866, 495870,
496948
496313, 496544, 496545,
496550, 497990, 497991,
497992
495867, 495868, 495871,
496949
496546, 496547, 496548,
496551, 497069, 497073,
497072, 497076, 497070
495869, 496947, 496950
496549
498006, 498007
498008
498021, 498022
498023
2009
2010
2011
2011/65/EU (from