Table of Contents
Advertisement
EN 42
5.
Q528.2E LB
•
2.2 Pacific3_P3FW0_x.x.x.x.zip. Not to be used by
Service technicians. A programmed PACIFIC device can
be ordered via your regional Service organization.
•
2.3 PQPrivate_U5207_x.x.x.x.zip. Not to be used by
Service technicians.
•
2.4 PQPublic_U5207_x.x.x.x.zip. Not to be used by
Service technicians.
•
2.5 ProcessNVM_Q531X_x.x.x.x.zip. Default NVM
content. Must be programmed via ComPair.
•
2.6 StandbySW_CFTxx_x.x.x.x_commercial.zip.
Contains the Stand-by software in "upg" and "hex" format.
- The "StandbySW_xxxxx_prod.upg" file can be used to
upgrade the Stand-by software via USB.
- The "StandbySW_xxxxx.hex" file can be used to upgrade
the Stand-by software via ComPair.
-The files "StandbySW_xxxxx_exhex.hex" and
"StandbySW_xxxxx_dev.upg" may not be used by Service
technicians (only for development purposes).
•
2.7 UpgradeAll_Q531X_x.x.x.x_commercial.zip. Only
for production purposes, not to be used by Service
technicians.
Caution: Never use this file, because it will overwrite
the HDCP keys! ! !
Service Modes, Error Codes, and Fault Finding
Hide quick links:
Advertisement
Table of Contents
