Emerson Smart Wireless THUM Quick Start Manual page 26

Quick Start Guide
Canada
I6 CSA Intrinsically Safe
Certificate: 2174201
Standards: CAN/CSA C22.2 No. 0-M91 (R2001), CAN/CSA C22.2 No. 94-M91 (R2001),
Markings: Intrinsically Safe Class I, Division 1, Groups A, B, C, and D T3C; Suitable for
when installed per Rosemount drawing 00775-0012; Type 4X/IP66
Europe
I1 ATEX Intrinsic Safety
Certificate: Baseefa09ATEX0125X
Standards: IEC 60079-0:2011; EN60079-11:2012;
Markings:
Special Conditions for Safe Use (X):
1. The surface resistivity of the antenna is greater than 1GΩ. To avoid
electrostatic charge build-up, it must not be rubbed or cleaned with solvents
or dry cloth.
2. The Model 775 enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however, care should be taken to protect
it from impact or abrasion if located in zone 0.
N1 ATEX Type n
Certificate: Baseefa09ATEX0131
Standards: IEC 60079-0:2011, EN 60079-15:2010;
Markings:
International
I7 IECEx Intrinsic Safety
Certificate: IECEx BAS 09.0050X
Standards: IEC 60079-0:2011, IEC 60079-11:2011;
Markings: Ex ia IIC T4 Ga, T4(–50 °C ≤ T
Special Conditions for Safe Use (X):
1. The surface resistivity of the antenna is greater than 1GΩ. To avoid
electrostatic charge build-up, it must not be rubbed or cleaned with solvents
or dry cloth.
2. The Model 775 enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however, care should be taken to protect
it from impact or abrasion if located in zone 0.
N7 IECEx Type n
Certificate: IECEx BAS 09.0058
Standards: IEC 60079-0:2011, IEC 60079-15:2010;
Markings: Ex nA IIC T4 Gc, T4(–50 °C ≤ T
26
CSA Std C22.2 No. 142-M1987, CAN/CSA C22.2 No.157-92, CSA Std C22.2
No. 213-M1987, C22.2 No. 60529
use in Class I, Division 2, Groups A, B, C, and D T3C; T3C(–50 °C ≤ T
II 1G Ex ia IIC T4 Ga, T4(–50 °C ≤ T
II 3G nA IIC T4 Gc, T4(–50 °C ≤ T
≤ +70 °C)
a
≤ +70 °C) IP66
a
≤ +70 °C) IP66
a
≤ +70 °C) IP66
a
June 2016
≤ +70 °C)
a