Table of Contents
Advertisement
Tools
Security
Security is not enabled by default. When you use this security feature to lock the drive, you will create a password that
must be entered to unlock it. The locked status continues after the drive is disconnected. That is, when the drive is
connected again, you need to enter the password to unlock the drive.
Each time you lock the drive, you need to complete the procedure to create a password. You can use the same
password used in previous sessions.
CAUTION: Also keep in mind that you must remember this password to unlock the drive.
There is no way to unlock the drive if you forget the password. It will be necessary to reset
the drive if you forget your password. This means you will lose any data on the drive.
NOTE: When you lock the drive, you must create a password. Set a password that you can
remember easily to unlock the drive.
14
Advertisement
Table of Contents
