Step 3: Remove the Smart Sensor Scale from the power base.
Step 4: Wipe the Smart Sensor Scale with a damp cloth until
clean.
Step 5: Wipe the well in the bottom of the power base with a
damp cloth until clean.
Step 6: Replace the Smart Sensor Scale by lining up the arrow
on the Disc to the arrow in the well of the power base.
Gently press down until the disc is level.
NEVER SUBMERGE
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
N12S_0901_UG Bluetooth update v5.indd 17
For more how-to information,
visit NutriBulletBalance.com
1/10/19 6:44 AM