NUTRIBULLET Balance User Manual page 16

temperature soapy water and screw on the Extractor Blade.
Place the cup assembly on the NutriBullet Balance, power base
for about 20-30 seconds. This will loosen the stuck ingredients,
and with a light scrub, you'll be all done.
CLEANING THE NUTRIBULLET BALANCE POWER
BASE & SCALE
For the most part the power base doesn't really get dirty, but if you
neglect to twist the blade on to the cup tightly, liquids can leak out
and get into the base and activator buttons. If this happens please
use the following cleaning instructions.
Step 1: The most important thing is to UNPLUG the power base
before cleaning!
Step 2: Make sure the blade is not attached to the power base.
N12S_0901_UG Bluetooth update v5.indd 16 1/10/19 6:44 AM