Charging Instructions; Mounting Instructions - KickAss KACHG1220 LI-ION Instruction Manual

CHARGING INSTRUCTIONS

Connect the charger to the battery and turn on charger
Charger will go into diagnostic mode and check itself before beginning the charge process.
During the charge process the charging and stage lamp will flash in various patterns this
indicates the state of charge that the battery is in. When the stage lamp is on this is known
as float stage and this can be left on the battery without overcharging.
DISCONNECTING:
Turn off charger.
Remove BLACK lead from battery first , then remove RED lead from battery.

MOUNTING INSTRUCTIONS

Stage chargers are designed for indoor use out of the weather
Ensure the battery and charger are installed in a well ventilated area
During charging.
If permanently mounting the charger be sure to allow a minimum of 10 cm clearance from
end plates this will allow adequate ventilation for the cooling fan.
3.5mm
mounting hole
7