Table of Contents
Advertisement
2
Safety instructions
The purpose of the XT-1000 level sensor is to gauge liquid levels in tanks. Use the level
sensor for this purpose only. The manufacturer accepts no liability for any form of
damage resulting from improper use!
The level sensor has been developed, manufactured and tested in accordance with state-
of-the-art technology and with recognized safety rules and regulations. Nevertheless,
hazards may arise from its use. For this reason, the following safety information must be
observed:
Do not change or modify the level sensor or add any equipment without the prior
consent of the manufacturer.
The installation, operation and maintenance of the level sensor must be carried out only
by expert, authorized personnel. Specialized knowledge must be obtained by undergoing
regular training.
Operators, installers and service technicians must comply with all applicable safety
regulations. This also applies to any local safety regulations and accident prevention
regulations which are not stated in these operating instructions.
The safety instructions in this manual are labelled as follows:
Failure to observe these safety instructions will result in a risk of
an accident or of damage to the XT-1000 level sensor.
Useful information designed to ensure continued and correct operation
of the XT-1000 level sensor or helpful advice to make your work easier.
XT-1000
Page 5/19
Advertisement
Table of Contents
