Srau Leds - TE Connectivity SPT-M1-8519-1 Installation Manual

SRAU LEDs
SECONDARY
REV
Ref # LED
1 LINK
2 STATUS
3 SECONDARY FWD
InterReach Spectrum Remote Access Unit Installation Guide
TECP-77-222 • Issue 1 • August 2012
SECONDARY
LINK STATUS
REV
LED Color Description
• Green • SRAU receiving communications from the IFEU.
• Red • SRAU has not received communications from the IFEU for more than 90
seconds.
• Off • During initial power up, SRAU is powering up and waiting for IFEU
communications.
• Green • Unit has no alarms or a Minor alarm is active.
• Blinking Green • Unit or band is set out-of-service.
• Red • Major alarm detected.
• Green • SRAU is powered on correctly.
• Yellow or • There is an MRAU FWD connection, but there is no MRAU REV connection
Blinking Yellow or the MRAU REV connection is paired incorrectly.
• Off • Cable is not connected to the MRAU FWD port.
LINK STATUS
SECONDARY
1 2
Secondary Remote Access Units
SECONDARY
FWD
FWD
3
© 2012 TE Connectivity Ltd.
Page 9