Hardware Installation - Memorex 8188RF User Manual

3

Hardware Installation

Slide Switch Setting
Step 1: Make sure your PC is switched off.
Step 2: Take the receiver and select channel CH1 or CH2 by using the
slide switch on the back of the receiver. (Remember your
selection.)
Bottom View of
Step 3: Connect the receiver to your PC by plugging in the receiver's USB
connector into your PC.
Step 4: Take the keyboard and make sure the batteries on the back are
installed correctly. (Follow the polarity signs in the battery
compartment.)
4
Slide Switch Setting of Receiver
USB Connector