4
Software Installation
After completing the hardware installation and turning the PC power on
you will have immediate access to the alpha-numeric keys of the
keyboard. In order to utilize the specialty keys you must first install the
keyboard driver using the CD included in the box.
To install the keyboard driver:
Step 1 : Remove any existing keyboard software from the computer.
Step 2: Insert the driver CD in your computers CD-ROM drive, the
software will auto run. If the software installation does not begin,
select the CD-ROM drive on your computer and run
"SetupKey.exe".
Step 3: Follow the on screen instructions to finish the installation
procedure. The driver by default will be installed at C:\Program
Files\KMaestro.
To install the Mouse driver:
In order to take advantage of the special shortcut button functionality of
the mouse you will have to install the mouse driver which is located on
the driver CD included in the box.
Step 1: Make sure the driver CD is in your computers CD-ROM drive.
Step 2: Run the "Setup.exe" in the mouse-driver directory of the driver
CD.
Step 3: Follow the onscreen instructions to finish the installation
procedure.
9