Leuze electronic DB 112 B Technical Description page 13

Selecting the operating mode (teach mode)
Press the TEACH IN button
for > 10s and < 15s
1.
2.
3.
Attention!
After selecting the operating mode (teach mode), a calibration must be performed!
Leuze electronic
LED green:
LED red:
LED off:
DB 112 B
LEDs and flash alternately at 3Hz

To select and exit:
Manual teach
press the TEACH IN button > 3s
(standard mode)
(LED
To advance to next:
press the TEACH-IN button < 3s

To select and exit:
Automatic teach
press the TEACH IN button > 3s
on the first sheet
(LED
To advance to next:
press the TEACH-IN button < 3s

Permanently To select and exit:
stored switching press the TEACH IN button > 3s
threshold (LED
To advance to next:
press the TEACH-IN button < 3s
Commissioning
yellow)
yellow)
yellow)



11