Table of Contents
Advertisement
Connecting the Display
Using the Computer
1.
Place the monitor in a convenient, well-ventilated location near your computer.
To adjust height of your monitor, unlock the stand lock on top of the stand.
2.
Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
3.
Connect the power cord into a proper power outlet
that is easily accessible and close to the display.
Power Cord
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Signal Cable
*
Digital signal
Analog signal
RS-232C
*
DVI-D
D-sub
OUT
IN
* Varies according to model.
Wall-outlet type
PC-outlet type*
When connecting DVI-D signal cable
PC
When connecting D-SUB signal cable
MAC
A4
*
PUSH
*
2
Mac adapter
For Apple Macintosh use,
a separate plug adapter is
needed to change the
15 pin high density (3 row)
D-sub VGA connector on
thesupplied cable to a 15 pin
2 row connector.
1
Advertisement
Table of Contents
