This should run-in the pump, but you should also check the oil temperature, which should Giant plunger pumps are only suitable for pumping fresh not exceed 140 F (60 clean water.
Page 3
GP7636GB-2.0 Pump Specifications U.S. Metric Maximum Volume*............36.4 GPM .........137.7 L/min Maximum Discharge Pressure* ........3800 PSI .......... 262 Bar Maximum Speed* ........................900 RPM Inlet Pressure ..............-4.35 to 145 PSI......-0.3 to 10 Bar Plunger Diameter.............1.4” ............36 mm Plunger Stroke ..............2.28” ..........58 mm Crankshaft Bore..................
Page 5
12056 Support Ring 08280 Washer, GP7655GB Only 07354 O-Ring 04158 Hexagon Socket Screw 13131 Inlet Valve Seat GP7636GB-2.0 PUMP REPAIR KITS Plunger Packing Kits - Valve Assembly Kit - # 09544 #09520 Item Part # Description Qty. Item Part # Description Qty.
Page 6
GP7636GB-2.0 REPAIR INSTRUCTIONS NOTE: Always take time to lubricate all metal and non-metal parts with a light film of oil before reassembling. This step will help ensure proper fit, at the same time protecting the pump non-metal parts (elasto- mers) from cutting and scoring.
Page 7
GP7636GB-2.0 REPAIR INSTRUCTIONS 10. Take tension spring (45) and seal pack (41, 42, 43) out of seal sleeve. Take a thin screw driver and pry out the grooved ring (39A). Note: This seal (39A) will not be reusable, so replace with a new part. For the seal-pack (41-43), remove with either a socket wrench or use a screw driver to push against the rear lip of the pressure ring (41) or v-sleeves (42).
Page 8
A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required prior to the return to Giant Industries of all products under war- ranty consideration. Call (419)-531-4600 or fax (419)-531-6836 to obtain an R.G.A. number.