Advertisement
Touchmonitor Connections
1. Connect the USB cable between the monitor's Mini USB connector & your PC's USB port.
It is recommended that you plug in both USB to your PC, in the order of red USB then black
USB.
2. The touchmonitor ships in an ON state, video should be displayed on your monitor
already.
Installing the DisplayLink Software Drivers
The DisplayLink technology enables video-over-USB. It allows your monitor to use one USB
cable for power, video and touch.
The drivers for the Windows 7, XP 32-bit (SP2, SP3), Vista 32-bit (SP1), and Vista 64-bit (SP1)
operating systems are available on the Elo T ouch Solutions website.
User Manual – 0700L
SW601504 Rev F
-
Page 6 of 18
Advertisement
