Fostex TE100 Owner's Manual

„ Care and storage of earphones
„
• The earphones may become dirty through normal use. For the earphone housing, wipe off any dirt
with tissue paper. For more delicate parts (such as the sound output holes), dust the dirt away with
the supplied cleaning brush. If the sound output holes are clogged, trouble may occur such as the
sound becoming quiet, the sound quality changing, or sound no longer coming out. In such cases,
please contact a Fostex distributor in your country listed on www.fostex.com.
• When you store the earphones in the mesh pouch, wind the cables in a figure of eight to prevent
deformation. If you put a desiccant in the mesh pouch, the earphones will be better maintained.
„ Replacing the cable
„
Though the signal wire, coating, and connector of the cable have high durability, trouble may occur
such as disconnection and noise in accordance with normal use. In such cases, use the dedicated cable
provided by us. Replace only when maintenance is needed as frequent replacement is not intended.
Caution
✐
• Use the dedicated cable when you replace the cable. Using a cable which has a different connector type
may cause trouble.
• Pinch the cable connector when you replace the cable. If you pull the cable, trouble may occur such as
disconnection.
Detach the cable
Grasp and pull the cable connector from the earphone. If
it is difficult, pull out while moving the cable from side to
side lightly.
Attach the cable
There are red and blue marks on the cable connector and
earphone to indicate the left and right sides. Insert the
cable connector into the earphone matching the color
and position of the marks.
4
Cable connector
Red mark
Blue mark
611927
© Printed in Japan May. 2016 8588156003
Stereo earphones
TE100
Thank you very much for purchasing a Fostex product.
This manual provides instructions for basic use of the unit.
Read this before using the unit for the first time.
8588156003
(611927)
Owner's Manual
© FOSTEX COMPANY All Rights Reserved.
1