kincrome 51000 Manual

kincrome 51000 Manual

2 drawer vehicle storage system

Advertisement

2 Drawer
Vehicle Storage System
Part No 51000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 51000 and is the answer not in the manual?

Questions and answers

Summary of Contents for kincrome 51000

  • Page 1 2 Drawer Vehicle Storage System Part No 51000...
  • Page 2 Installation: Includes: Remove right hand side top section by undoing the 10 retaining screws Mounting Kit: and set aside taking care not to loose 4 x bolts the fasteners and remove/open the 4 x washers fridge slide by sliding outwards. This 4 x locking nuts allows access to the internal base of the drawer system so it can be bolted...
  • Page 3 Installation: Remove the 2 drawers by Check the base of the vehicle unlatching the 2 retaining latches that the drawer system is to be located at the rear interior of each of the installed in and identify suitable drawers mounting points within the vehicle. Either use existing vehicle mounting Due to the heavy weight of this points or new drill new mount points...
  • Page 4 Installation: Use the existing removed vehicle bolts to secure the frame base via mounting slots provided OR the mounting bolts provided to secure to the vehicle. Ensure the bolts as securely tightened and use a suitable thread glue to ensure they do not loosen. Refit both drawers ensuring that rear locating stops automatically engage.
  • Page 5 Care and Maintenance: ENSURE: AVOID: • Ensure all extremities are clear • Do not overload the fridge slide of moving parts especially when weight capacity (Keep below 85kgs) opening and closing the drawers and fridge slide • Do not overload the drawers (keep below 100kgs) •...
  • Page 6 Care and Maintenance: Maintenance: • Remove both drawers using the • Regularly check and tighten all internal rear latches and inspect all fasteners including mounting and clean all roller bearings points using a clean cloth or rag • Replace seized, rough, loose roller bearings •...
  • Page 7 51000-20 Drawer (LHS) 51000-9 Mounting bolt kit 51000-21 Drawer (RHS) 51000-10 Hex key kit x 8 51000-22 Base cross beam mounting brackets x 4 51000-11 Screw kit x 24 51000-23 Rubber stopper 51000-12 Stainless side panels 2pce (right & left)
  • Page 8 Dimensions: Weight: 75Kg...

Table of Contents