Disconnecting The Earphones From A Bluetooth Device; Installing The Smart Control App - Sennheiser MOMENTUM True Wireless Instruction Manual

Using the earphones
If no connection is established within 1 minute, pairing mode is
terminated and the earbuds switch to idle mode. If necessary,
repeat the pairing procedure.
Disconnecting the earphones from a
Bluetooth device
▷
Via the menu of your Bluetooth device, disconnect the connection
to the earphones.
The earphones are disconnected from the Bluetooth device. The
earphones then search for other paired devices. If no device is
found, you hear the voice prompt "No connection". The earphones
go to idle mode.
If you want to clear the Bluetooth pairing list of the earphones,
reset the earphones to the factory default settings (> 29).

Installing the Smart Control app

To make full use of all the settings and functions of the earphones,
you need to have the free Sennheiser Smart Control app installed on
your smartphone.
Download the app from the App Store or Google Play and install it on
your smartphone. Alternatively, you can use your smartphone to
scan the following QR code or to call up the following Internet site:
www.sennheiser.com/device-control-app
▷
Connect your smartphone to the earphones using Bluetooth (>
13).
▷
Start the Smart Control app.
The Smart Control app recognizes the earphones and activates
all available settings and functions.
MOMENTUM True Wireless | 15