Table of Contents
Advertisement
2. Install or remove the battery.
Note:Please power off your phone before removing the battery.
3. Install or remove the microSD card.
Insert the mocroSD card with golden contact facing downwards into the slot. To
remove the microSD card, press down the rib and then slide the microSD card out.
Activationand Service
Before using your phone, you must set up your service with Boost Mobile. You will need your
phone's serial number (MEID), printed on a sticker inside the battery compartment.
Create Your Account and Pick Your Plan
Set up your Boost Mobile account.
1. From your computer, visit boostmobile.com/activate.
2. Enter your phone's MEID and click start actvivation process.
Your phone's MEID (serial number) is printed on the sticker located on the back of
your phone in the battery compartment. This number can also be found on the
bottom panel of the phone's package.
3. Follow the remaining instructions to choose your plan and select a payment method.
4. Follow the activation instructions below and you'll be able to start using your phone.
Note: You can also activate by phone by calling 1-888-BOOST-4U(1-888-266-7848) from any
other phone.
Get Started
2
Advertisement
Table of Contents
