Nap Feature - La Crosse Technology C86224 Instructional Manual

Fahrenheit or Celsius

Nap Feature

Sometimes, we just want a quick nap without having to set a new
alarm. Set the nap duration one time, then, a simple press of the
NAP button starts the nap countdown.
Set Nap Duration:
1. Hold the NAP button for 3 seconds. NAP and the duration will show
(default is 10 minutes).
2. Use the +/- buttons to select a nap duration (up to 120 minutes).
3. Press the NAP button to confirm and start nap count down to zero.
4. Press the SNZ/LIGHT button at any time to exit.
Ready for a Nap? Press the NAP button once, and the clock will wake
you at the preselected time.
• From normal time display, press the NAP button once to start the
nap feature for the preset time. NAP will show with the preset
duration.
• Minutes and seconds will countdown.
• When the alarm sounds NAP and 0m will flash. The alarm will
sound for two minutes and then stop if no buttons are pressed.
• Press any button except SNZ/LIGHT, at any time to exit nap mode.
C86224
PM
www.lacrossetechnology.com/support
Snooze Time 5-120 minutes
PM
Page | 3