Reflex Remapping Buttons; Programming Mode; Build Floor; Build Wall - Sony PS4 FORTNITE PRO Instruction Manual

R
EFLEX REMAPPING BUTTONS
Reflex remapping buttons are buttons or paddles on the back of the controller which can automatically
perform functions within the game or be mapped to standard controller buttons. These buttons default
to quick building options, however they can be changed to different functions within the programming
mode. Below is a list of all functions and how they operate.
QUICK BUILD MACROS – There are 4 build options within the game (Wall, Floor, Roof, Ramp) these
•
can be assigned to any of the reflex buttons. When assigned you can quickly tap to build the
structure or hold the to continuously build while moving. When you release the button you are
automatically switched back to combat mode.
Please note that for the build options to work in old school or quick build button layouts you must enable the "reset the building choice" option
•
in the Fortnite game settings.
1 st / LAST WEAPON SELECT – There are 2 assignable options for this feature. If you assign the 1
•
weapon in your inventory will automatically be selected regardless of what weapon is currently equipped. Similarly when the last weapon select is
assigned to the reflex button, when tapping the button the last weapon in your inventory will be selected. If you have only 3 weapons the 3
select, if you have 5 weapons the 5
Please note these options do NOT work for old school or quick build button layouts .
•
STANDARD BUTTON REMAPPING – Instead of the macros described above you can assign standard controller buttons to the reflex buttons, all buttons,
•
triggers and D-pad directions can be assigned to the reflex buttons (except for the share, options and PS buttons). Multiple buttons can be assigned to one
reflex button, for example X, R2, L1 and UP on the D-pad could all be assigned to one reflex button and when the reflex button is pressed all 4 of those
controller buttons would be pressed at the same time. In addition, when the reflex buttons are used for remapping, you can set the button to one of 3
turbo speed settings or a standard solid press.
P
ROGRAMMING MODE
Within the programming mode you can setup the reflex buttons for different build options or as remapping buttons. You can also enable/disable the other
controller features such as Rapid fire or Jump shot.
To Enter the programming mode HOLD R1 + R2 + L1 + L2 for 8 seconds, the green LED will make one long flash.
•
To assign a build or weapon select macro to a reflex button first hold the button described below for the macro option and then tap the reflex button you
•
would like to assign it to. The green LED will flash once to acknowledge your selection.

BUILD FLOOR -

•

BUILD WALL -

•
BUILD ROOF -
•
To Configure a reflex button for standard remapping, press and hold a reflex button, while holding tap any button you
•
would like to assign, this can be multiple buttons if you like.
Example 1: Hold reflex button, tap triangle, release reflex button. The reflex button now functions as Triangle
•
Example 2 : Hold reflex button, tap X, tap R1, tap UP on D-pad, release reflex button. When the reflex button is
•
pressed, X, R1 and UP are all pressed on the controller at the same time.
To make a reflex button turbo hold DOWN on the D-pad and tap the reflex button you would like to make turbo. There are
•
4 setting that will be cycled through as you tap the reflex button. The LED will flash 1-4 times to indicate the setting.
1 Flash = No Turbo
•
To change the button layout, tap UP on D-pad, the LED will flash 1-4 times to indicate the setting. (Default = Builder Pro)
•
1 Flash = Builder Pro
•
To disable/enable mod feature just tap the button indicated below. When a feature is disabled you will not be able to turn
•
it on. This is useful when there is a feature you will not use and you want to be sure you cannot turn it on by accident.
Enable/Disable
Rapid Fire
TAP
To exit the programming mode just tap the touchpad.
•
MASTER RESET – To reset the mod to default settings, turn off the controller hold X + Triangle
•
+ Circle + Square and turn on the controller. You will see the LED flash very fast 10 times.
th
is selected.
REFLEX
HOLD TAP
REFLEX
HOLD TAP
REFLEX
HOLD
TAP
2 Flashes = 5sps Turbo 3 Flashes = 10sps Turbo
2 Flashes = Combat Pro
Enable/Disable
Jump Shot
TAP TAP
TAP
st
BUILD RAMP -
•
ST
1 WEAPON -
•
LAST WEAPON -
•
4 Flashes = 15sps Turbo
3 Flashes = Quick Builder 4 Flashes = Old School
Enable/Disable
Crouch Shot
TAP
REFLEX
BUTTONS
weapon select, when tapping the reflex button the first
HOLD ALL FOR 8 SECONDS
REFLEX
HOLD TAP
REFLEX
HOLD TAP
REFLEX
HOLD TAP
REFLEX
HOLD
HOLD
TAP
Enable/Disable
Auto Aim
TAP
HOLD ALL BUTTONS WHILE TURNING ON CONTROLLER
rd
weapon is
TAP ANY
BUTTON(S)
REFLEX
TAP
Enable/Disable
Auto Run