ACL Incorporated
1960 E. Devon Avenue, Elk Grove Village, IL 60007
To increase the accuracy merely adjust the calibration at the use temperatures and humidities
the meter will be used. For example, if you were using the meter at 70º F and 70 RH you would
calibrate the meter exactly at those conditions using a 1% accuracy standard thermometer and
relative humidity meter.
The meter will be stable and stay accurate at those conditions.
Allow the meter to equilibrate at those environment conditions. It sometimes takes ½ hour for
the meter to adjust to new environment conditions.
O
A
:
PTIONAL
CCESSORIES
M
P
C
INIATURE
ROBES WITH
•
Two miniature conductive rubber external probes
•
One shielded BNC coaxial molded cable with gold center pin
•
Two female banana jacks to fit an ACL 800C meter
•
Made in USA
•
Will measure resistance of all small surfaces according to ESD S11.11
•
Replaceable probes
•
Conforms to all EOS and CE test procedures
M
R
EASURING
ESISTANCE TO
•
Measure resistance of ESD garments
•
Stainless steel surface areas
•
Test according to ESD-STM2.1-1997
•
Made in USA
•
One year warranty
MKB June 18, 2008
ORDS
G
(RTG)
ROUND
G
C
ARMENT
LIPS FOR TESTING
847-981-9212
ESD
S
MOCKS
Page 12 of 12