TMC Aquarium V2Bio React Instructions For Installation And Use Manual page 6

Step 5
Install and securely tighten the water outlet
fitting (8) and water outlet pipe assembly
(9) - failure to do so will result in leaks.
Step 7
Install the hanging bracket (15) if required.
Step 6
Install and securely tighten the water inlet
90° elbow hosetail assembly (5) - failure to
do so will result in leaks.
Step 8
Remove the filter media inlet plug (1) and
carefully pour your chosen media into the
reactor. Once filled, replace the filter
media inlet plug (1) and securely hand
tighten - failure to do so will result in
leaks.
4