TMC Aquarium V2Bio React Instructions For Installation And Use Manual page 5

The versatile, compact design of the V
internally in a sump or aquarium or externally as a stand alone 'hang-on' unit.
SSEMBLY ND INST LL TION
2
The V Bio React Pellet Reactor is supplied almost fully assembled. fter unpacking and before
installation you must:-
Step 1
Thoroughly rinse the V
React Pellet Reactor with
fresh water.
Step 3
Position and secure the water inlet pipe
assembly (12).
2
Bio React Pellet Reactor allows it to be installed
2
Bio
Step 2
Locate and correctly position the sponge
(11) on the filter lid (3).
Step 4
Ensuring that the
filter lid 'O' ring (4)
is correctly
positioned, replace
the filter lid (3) and
securely hand
tighten - failure to
do so will result in
leaks.
3